EV Charger Installation Gold Coast
Safe, compliant, and fast home EV charging, installed by a licensed electrician, not a subcontractor.
Stop waiting 30 hours for a full charge.
Charging an EV off a standard 10-amp powerpoint trickles in roughly 10–15km of range per hour. That’s fine for a Toyota Prius from 2008, less fine for a 75kWh Model Y you need ready by 7am. A proper 7kW wall charger does the same job in 6–8 hours overnight, on a dedicated circuit that won’t trip the house every time the dryer kicks on.
What We Install
01
Solar-Optimised Charging
Smart chargers like EVNEX and Fronius that monitor your home's energy and charge your car using excess free roof solar.
02
Tesla Wall Connectors
Expert installation of Tesla Gen 3 Wall Connectors, perfectly integrated with your Tesla app, vehicle and ecosystem.
03
Universal Fast Chargers
Standard Type 2 wallboxes (7kW and 22kW) for BYD, MG, Polestar, and Hyundai. Tethered or untethered setups.
From first contact to first charge — usually under a week
Here’s exactly what happens when you book an EV charger install with INEX.
Quote
Install
Certify + handover
SWITCHBOARD AUDIT INCLUDED
Every quote starts at your switchboard, not on a spreadsheet.
EV chargers pull 32 amps continuously for hours at a time – more than your oven, kettle, and aircon combined. Before I quote, I check your switchboard capacity, your mains cable rating, and whether you’ve got RCBO protection where you need it. If your board needs work to handle the load safely, you’ll know upfront. No blown fuses on install day, no nasty invoice add-ons.
ONE BLOKE, START TO FINISH
You'll deal with me from the first call to the final handover.
No call centres, no sales reps, no subbies turning up the day of install. I quote the job, I do the install, and I’m the one who comes back if anything plays up. It means I can’t always answer the phone on the spot — but it also means the person who shows up at your house already knows your job inside out.
Not sure if you’re in the service area? Call James on 0439 222 130 — he’ll let you know straight up.
Installing chargers across the Gold Coast
Based in Southport, on the road across the Gold Coast and northern NSW border. Same-day callouts available for most areas during business hours.
North
Southport · Labrador · Helensvale · Hope Island · Coomera · Upper Coomera · Oxenford · Pimpama
Central
Surfers Paradise · Bundall · Benowa · Ashmore · Nerang · Carrara · Robina · Varsity Lakes
South
Mermaid Beach · Broadbeach · Burleigh Heads · Burleigh Waters · Miami · Palm Beach · Elanora · Currumbin · Tugun · Coolangatta · Kirra · Tallebudgera
Common questions about EV charging
How much does an EV charger installation cost on the Gold Coast?
Most single-phase installs land between $650 and $2,200, depending on how far your charger sits from the switchboard and whether your board needs any work to handle the extra load. Three-phase installs and switchboard upgrades push higher. You get a fixed written price after the on-site check -no estimates that creep up on invoice day.
Do I need 3-phase power for an EV charger?
Not necessarily. A single-phase 7kW charger adds roughly 40km of range per hour, which fills most EVs overnight without breaking a sweat. If you’ve got 3-phase at the house, a 22kW charger will top up about three times faster – handy if you’re doing back-to-back long trips, overkill for most daily commuters.
How long does the install take?
Standard single-phase installs are usually 3–4 hours. Three-phase, long cable runs, or jobs that need switchboard work can stretch to a full day. I’ll tell you upfront when I quote so you can plan the day.
Will my solar work with the charger?
Yes – most modern smart chargers (Fronius Wattpilot, Tesla Wall Connector, EVNEX) integrate with solar so you can prioritise charging off your panels instead of pulling from the grid. If you’ve got solar already, mention the inverter brand when you call and I’ll match a charger that talks to it cleanly.
Do I need approval from Energex before installing?
Yes, single-phase EV chargers drawing more than 20 amps require an Energex-compliant installation. Three-phase chargers can be installed up to 40 amps per phase without any Energex paperwork. Don’t worry – I handle all the Energex compliance for you and can talk you through exactly what is required to keep your EV safe and compliant.
Can you install a charger if I don't have a garage?
Yes. Wall-mounted chargers work fine under eaves, on carports, on external walls, or on a dedicated pedestal in a driveway. All the units I install are IP-rated for outdoor use. The only thing to plan around is cable run length and making sure the charger sits somewhere your car can actually reach.
Do you supply the charger, or do I buy it first?
Either way. I can supply and install the charger as one fixed price (usually the easier route – you get one invoice, one warranty contact, one person to call if something plays up). Or if you’ve already bought a charger online or through your car dealer, I’ll install that. Just check it’s a model I’m familiar with before you buy — happy to give a 2-minute sanity check over the phone.
Can I claim the install on a novated lease or as a business expense?
Often, yes – particularly if the EV is novated, a business vehicle, or used for work. The install invoice itemises labour, materials, and certification separately so your accountant or salary packager can process it cleanly. I’m not a tax advisor, so check with your accountant on what’s claimable in your specific setup.
What's the warranty?
12 months on the install workmanship, direct from me. Charger warranty depends on the brand – Tesla Wall Connector is 4 years, Fronius is 5 years, EVNEX is 3 years, most others sit between 2 and 5. If anything goes wrong with the install in the first year, I come back and fix it at no charge.
Can you install at a townhouse, apartment, or strata property?
Townhouses with their own meter and switchboard, usually straightforward. Apartments and strata-managed carparks are trickier – we need body corporate approval, sometimes a sub-meter, and the install has to comply with strata bylaws. Happy to talk through it, but expect a longer timeline than a standalone house.
Tesla owners - Wall Connector or Universal Mobile Connector?
If you own the house and plan to stay a few years, the Wall Connector is the way to go every time – it’s a faster, cleaner install, and a dedicated unit that adds value to the property. The Universal Mobile Connector is fine as a backup or for renters, but it’s much slower (limited to a 2.3kW max draw, whereas the hardwired Wall Connector can draw up to 7.7kW max). Plus, with the mobile connector, you’re plugging into a standard outlet rather than a purpose-built charger.
What if I switch cars later - will the charger still work?
Every charger I install is Type 2, which is the standard connector on every EV sold in Australia (including Teslas, which ship with a Type 2 port locally). Switch from a BYD to a Polestar to a Tesla – the charger doesn’t care.
Ready to get your EV charging at home?
Call James direct, or send through the details and you'll get a quote back the same day.
Mon–Fri 7am–4pm · Sat 7am–12pm · Sun closed After-hours emergencies: call and I'll do my best to help.